- 相關推薦
cisco設備配置基本知識
cisco設備配置的步驟大家掌握了嗎?相信只要按照下面的操作,一定可以達到我們想要的實驗結果,更重要的就是希望大家已經掌握了cisco的配置知識。
cisco設備配置—前提配置:
en conf t no ip domain-lookup line con 0 logg syn exec-time 0 0 exit host r1
cisco設備配置—VTP配置:
vtp domain domain_name vtp mode server/client/transparent vtp password password vtp pruning vtp version 2
查看VTP配置:show vtp status
cisco設備配置—VLAN配置:
vlan database (特權模式) vlan 2 name caiwubu exit vlan 2 (全局模式)
查看VLAN配置:show vlan brief
cisco設備配置—VLAN Trunk配置:
swit trunk encapsulation isl/dot1q/negotiate (接口里面,封裝類型) swit mode trunk
查看配置:show int f0/1 swit
以太網通道:
int rang f0/1 -f0/10 swit mode trunk chan lacp;pagp channel-group 1 mode on exit
cisco設備配置—三層交換配置:
ip routing no swt (改為路由接口) ip helper-add 192.168.1.1 (DHCP服務器地址)
cisco設備配置—PVST+配置:
1.span vlan 2,4-6 pri 4096(倍數0-32768) 2. root pri/sec span vlan 2 cost 150 (0-255) span vlan 2 por *
查看配置:show span show span vlan * d
cisco設備配置—HSRP配置:
int vlan 2 ip add 192.168.1.1 255.255.255.0 stan 2 ip 192.168.1.254 (虛擬的IP地址) stan 2 pri 150 (0-255) stan 2 pree stan 2 track int f1/0 100
查看HSRP:show stan b
cisco設備配置—ACL配置:
標準:acc 1(1-99) per(pre den) source(數據源地址)
int f0/0 ip nat inside int f1/0 ip nat outside int f0/0 ip acc 1 in
擴展:acc 101(100-199) per(pre/den) protocol(協議) 源地址 目標地址 --
命名:ip acc stan/ext test
per/den host 192.168.1.1
定時:time-range mytie
per wee 8:30 to 17:30
acc ....... time-range mytie
查看:show acc
cisco設備配置—NAT配置:
靜態:ip nat ins sou sta 192.168.100.2 61.159.62.136
端口映射:ip nat ins sou sta tcp 192.168.100.2 80 61.159.62.131 8080 extendable
動態:acc 1 per 192.168.1.0 0.0.0.255
ip nat pool test0 61.159.62.131 62.159.62.190 netmask 255.255.255.192 ip nat ins sou list 1 pool test0 overload PAT: acc 1 per 10.1.1.0 0.0.0.255 1.ip nat pool test1 61.159.62.131 61.159.62.131 netmask 255.255.255.148 ip nat ins sou list 1 pool test1 overload 2.ip nat ins sou list 1 int f0/0 overload
cisco設備配置—RIP配置:
router rip ver 2 no au- network 192.168.1.0 -----
cisco設備配置—OSPF配置:
router ospf 1 router-id 1.1.1.1 network 10.0.0.0 0.0.0.3 area 0
末梢區域:area 1 stub
完全末梢區域:area 1 stub no-su
ness:area 1 nssa
完全ness:area 1 nssa no-su
路由重分發:
router rip red ospf 1 metric 10 router ospf 1 red rip subnets def-in orig (默認) red sta subnets (靜態) red conn subnets (直連)
【cisco設備配置基本知識】相關文章:
cisco思科交換機配置篇08-01
Cisco路由器配置命令大全06-12
CISCO路由器CHAP認證配置06-17
Cisco路由器安全配置命令10-27
Cisco交換機配置主要語句匯總08-23
cisco路由器voip配置解析201610-16
cisco交換機安全配置設定命令大全06-05
CISCO路由器配置命令詳解設置試題08-28
Cisco路由器配置入門知識大全08-02